- Rotating Atomizer with External Charging
Version:: 07 • As of:: 01/2020
Solvent group Ingredient
Aromatic hydrocarbons (Solvent Naphta; High Flash Aromatic
Naphtha)
Xylene, toluol, or mixtures or blends of
the two
Ketone Methylisobutylketone MIBK
Ester N-butyl acetate (butyl acetate)
The list does not address all critical ingredients. Use only detergents
that meet the prescribed requirements.
Use of n-butyl acetate with non-inflammable paints
N-butyl acetate can also be found under the following names:
- Butyl acetate (ButAc)
- Butyl ethanoate
- N-butyl acetate
You may use butyl acetate (cleaning by hand with a cloth) non-
flammable paints for gentle manual precleaning.
Requirements for external cleaning of the atomizer body with ButAc:
- No continuous load (e.g. plastics not to be immersed in ButAc)
- Maximum load temperature 25 °C
- No re-distilled ButAc or ButAc with extenders (e.g. aromatic
hydrocarbons and their derivatives)
- Gentle cleaning (cleaning cloth moistened with ButAc)
- Subsequent drying and re-cleaning with iso- or n-propanol
A T T E N T I O N
Danger of property damage and interruption of production
If you immerse bell disks in ButAc, they can be damaged.
Do not immerse bell disks in ButAc. Use ButAc for precleaning only.
Pos: 46 /INP/ Bell2/07_03 R einigungs- und Wartungsp lan_AA @ 59\mo d_15801359 85360_20. docx @ 666241 @ 2 @ 1
7.3 Cleaning and maintenance plan
Interval Maintenance activity Personnel
2 times per shift Visual check of the shaping air ring
for stains and damages; cleaning;
atomizer body should be fully
screwed in.
Assembly
personnel
Visual inspection for contamination:
Components for external charging
and atomizer
Paint staff
To Next Page
Loading...