- Rotating Atomizer with External Charging
Version:: 07 • As of:: 01/2020
3 Transport and storage
3.1 Delivery
The atomizer is delivered in a box.
If you notice a defect in the delivered products then kindly contact the
address specified in the chapter “Contacts & Hotline”.
3.2 Storage
Environmental condition at storage location:
- Temperature: 10 °C – 40 °C
- Humidity: 35% – 90%
Pos: 19 /INP/ Bell2/03_01 La ger_AA @ 4 0\mod_1410 429563920_ 20.docx @ 498 569 @ 3 @ 1
3.2.1 Storage of electrode rings and atomizer body
Electrode ring and atomizer body are made of a special white plastic.
The parts are in packages, which are also suitable for storage.
Different from the general provisions of storage, the following
provisions are applicable to electrode ring and atomizer body:
Storage provisions
Temperature 20 °C - 26 °C
Room humidity 35% - 90%
A T T E N T I O N
Danger of damage to property and interruption to production
Deformation of parts.
Please pay attention to the storage provisions for electrode ring and
atomizer body.
The dimensions of the electrode ring and the atomizer body are
temperature dependent. The parts can be fit correctly in the atomizer
only when the storage provisions are adhered to.
Improperly fitted parts can cause problems in the operation of the
atomizer.
Pos: 20 /INP/ Bell2/04_00 F unktionsbe schreibung @ 39\mod_140 8524916770 _20.docx @ 49 3672 @ 1 @ 1
To Next Page
Loading...