Dorr EcoBell2 SL EC - 12 Contacts and Hotline; 13 Appendix; 13.1 Check list for commissioning - External charging G500

Operating Manual
© Dürr Systems AG
152 / 156
EcoBell2 SL EC
- Rotating Atomizer with External Charging
Contacts and Hotline
Document No.: MRA00001EN
Version:: 07 • As of:: 01/2020
Position Order number Denomination Number
34 N34960018 Flat seal 12x1 1
35 Needle Seat 1
36 O-Ring 8x1 1
37 N34960019 Valve unit L142 Main needle 1
38 Valve unit L35 2
39 Ring with carbon fiber brush 1
40 N34960020 O-ring 7x1.5 4
41 Sealing ring D9 2
42 O-Ring 4x1.5 6
43 Sealing ring D13 1
Pos: 76 /INP/Übergreifende Kapitel/11 Service NEU @ 44\mod_142485 5368193_20. docx @ 5388 09 @ 1 @ 1
12 Contacts and Hotline
If you have queries or would like technical information, please contact
your dealer or sales partner.
Document No.
Version:
As of:
Approved
Table of Contents
Pos: 77 /INP/ Bell2/12 Anhan g_AA @ 59\m od_158013 6107463_20.d ocx @ 6662 67 @ 12 @ 1
13 Appendix
13.1 Check list for commissioning - External charging G500
1 Measurements
Measuring instruments used Measuring device number
High voltage measuring device
Capacitance meter
Scope meter
Insulation tester
Installation measurements Date Name / Signature
Low impedance measurement performed and
appended to the protocol of this check list
Insulation measurement performed and appended
to the protocol of this check list
Loop measurement performed and appended to
the protocol of this check list