Configuration
System Defaults
124
System Defaults
Setting the external interface
Evita 4 offers the following interface protocols:
– Printer
– MEDIBUS (Dräger communications protocol for
medical equipment)
– LUST (list-driven universal interface driver program,
compatible with the Evita RS 232 interface from
software version 7.n)
● Press the »Configuration« key.
● Touch the »System Defaults« screen key.
● Select the required port with screen keys »COM1«,
»COM2«, »COM3« (COM2 and COM3 are optional).
● Select the required interface protocol with the screen
keys »Printer«, »MEDIBUS« and »LUST«
● Display (example):
Select the interface parameters for the selected interface
protocol:
● Touch the screen key for the parameter, e.g.
»Baud rate«
● Change value = turn rotary knob.
● Confirm value = press rotary knob.
For MEDIBUS protocol:
Baud rate
Parity check bits (see Operating Manual of the
connected device)
Number of stop bits (see Operating Manual of the
connected device)
For LUST protocol:
Baud rate
For printer protocol:
Baud rate (see Operating Manual of the printer)
Print interval (set in accordance with protocol
requirement)
To connect a printer to Evita 4
(HP Deskjet 500 and compatible printers with serial
interface)
184 37 207
To Next Page
Loading...
