26
»Special Procedures« Screen Page
This page is used to display and perform the following
special measuring procedures:
– Intrinsic PEEP
and
– Occlusion pressure P 0.1
The desired special procedure is selected by the
appropriate screen key on the right. The result of the last
special procedure is displayed.
Example: Intrinsic PEEP:
To start the special procedure:
● Touch the »Start« screen key.
For detailed operating instructions, please refer to
page 93 and 94.
»Calibration« Screen Page
This page is used for calibrating
– the O2 sensor
– the Flow sensor
– the CO2 sensor
● Select the desired sensor with the »O2«, »Flow« or
»CO2« screen keys.
Calibration starts as soon as the relevant key is
pressed.
Evita 4 provides the necessary calibration instructions in
the Help Function line at the bottom of the screen.
For detailed operating instructions, please refer to
page 97 et seq..
Operating Concept
Screen Pages
020 37 207021 37 207
To Next Page
Loading...
