What's what
Control unit
1 Key for displaying the »Measured Values« screen
page.
2 Key for displaying the »Alarm Limit« screen page.
For displaying the measured values and alarm limits,
and for setting the alarm limits.
3 Key for displaying the »Settings« screen page.
For setting the ventilation modes and ventilation
parameters.
4 » « key for displaying help information for settings.
5 Red LED to indicate warnings
6 Yellow LED to indicate cautions and advisory
messages
7 »g« key for cancelling the acoustic alarm for
2 minutes.
8 »Stop« key for "freezing" curves.
9 »Alarm Reset« key for acknowledging alarm
messages.
10 »?« key for selecting the standard screen page.
11 »O« key for switching between operating and
standby mode.
12 Central rotary dial-knob for selecting and confirming
settings.
13 Key for displaying the »Configuration« screen page.
14 Key for displaying the »Calibration« screen page.
15 Key for displaying the »Special Procedures« screen
page. For measuring PEEPi and Occlusion Pressure.
16 Touch-sensitive screen for displaying application-
specific screen pages.
17 » « key for manual printer logging.
18 » « key for switching the screen to bright or dark.
19 »Exp. hold« key for prolonging/holding expiration.
20 »Insp. hold« key for manual inspiration.
21 »O2 suction« key for oxygenation for bronchial
suction.
22 » « key for switching on the medicament
nebuliser.
148
What's what
7
9
8
11
10
22
21
20
17
16
15 14 13 12
1 2 3 4
19
18
5
6
MT-156-98e
To Next Page
Loading...
