Return to the normal loop display:
● Touch the »Zoom« screen key.
The time-based curve automatically reappears when the
loop page is exited.
Display loops in the upper graphic area (available as
upgrade)
● Touch the » « screen key.
● Touch the »Loops« screen key.
The time-based curves are replaced by the two loops in
the upper graphic area.
The Freeze function can also be used with loops in the
upper graphic area.
Loops in the upper graphic area cannot be configured
when
– the »Loops« menu is open,
– the »Configuration« key has been selected.
To restore the time-based curves in the upper graphic
area:
● Touch the right-hand » « screen key.
● Touch the »Curves« screen key.
Operation
Displaying Curves and Measured Values
84
116 37 207117 37 207
To Next Page
Loading...
