Dräger Fabius plus - Page 74

Assembly and preparation
74 Instructions for use Fabius plus SW 3.n
2 Connect a breathing hose (A) on each of the
inspiratory port and expiratory port, optional
with microbial filter installed.
3 Connect both breathing hoses on the Y-piece
(B).
4 Connect the sample line (D) to the connector of
the Y-piece (B) and to the connector of the
water trap (E) on the patient-gas measurement
module.
5 Connect the breathing bag hose (C) with the
breathing bag to the corresponding connector.
21456
A
B
C
D
E