Instructions for use | Oxylog VE300 SW 1.n 83
Configuration
On the first dialog page:
– Ventilation category (A)
– CPR, SPN-CPAP, Ventilation (volume), Ventilation (pressure)
– Buttons Back, Next and Finish (B) navigate within the dialog.
On the second dialog page:
– Ventilation (volume) (A)
– VC-CMV/VC-AC, VC-SIMV, VC-SIMV/PS
– Buttons Back, Next and Finish (B) navigate within the dialog.
The following dialog pages of the ventilation settings are dependent on the selected
ventilation category and the selected ventilation mode.
The sequence to access the preset values is always as follows:
1. Select the patient category (Adult or Child) (A).
2. Select the ventilation category (CPR, Ventilation (volume), Ventilation
(pressure) or CPAP) (B).
3. Use Next (C) to navigate to the next dialog page.
4. Select Ventilation (volume) VC-CMV/VC-AC or VC-SIMV/PS (option).
5. Use Next (C) to navigate to the next dialog page.
Depending on the selected settings, the ventilation settings can now be set on
up to 3 dialog pages.
6. Touch the Finish (D) button to apply and save the set values.
3306633068
To Next Page
Loading...
