7.6 Service Scheduler
The Service Scheduler is a preventative maintenance feature that allows the OEM to set up
scheduled servicing plans for their scooter customers.
If enabled, a Service Period can be programmed into the controller. Once the Drive Time
exceeds this value, the status LED will flash slowly 3 times every time the scooter is turned
on or wakes up from sleep, to indicate the service is due. This is repeated every 15
minutes. Setting the value of Service Period to zero will disable the Service Scheduler and
its alarm.
To enable the Service Scheduler function, set Service Scheduler to 'Yes' and set Service
Period to the desired number of drive time hours before a service is due. To clear the
service indication, erase the controller history with the Wizard:
Tools -> Erase Controller History.
Note
Erasing the controller history erases the fault log as well.
Consequently, erasing the controller history to erase the fault log will reset the service scheduler as well.
GBK51948 RHINO2
Installation Manual Issue 5
Diagnostics - Page 131
To Next Page
Loading...
Need help?
General
