6 Programming
6.1 The Hand Held Programmer (HHP) 57
6.1.1 Programming menu 57
6.1.2 Diagnostics menu 61
6.1.3 Technician menu 62
6.2 Dynamic Wizard 64
6.2.1 Software version and module version 64
6.3 Parameter List 65
6.4 Parameter Variations 70
6.4.1 Variations by module 70
6.4.2 Variations by Profile 1 70
6.4.3 Variations by Profile 2 70
6.5 Parameter Descriptions 71
6.5.1 User Personalisation 72
6.5.2 Throttle Configuration 76
6.5.3 Drive Performance 83
6.5.4 OEM Drive Limits 94
6.5.5 Motor Management 95
6.5.6 Park Brake Management 106
6.5.7 Battery Management 108
6.5.8 System Options 111
6.5.9 Multi-function Inputs Configuration 113
6.5.10 Multi-function Outputs Configuration 118
Warning
Performance adjustments must only be made by healthcare
professionals, or by persons who completely understand the adjustment
process and the capabilities of the operator.
Wrong settings, or programming in a location that is not safe, can cause
injury to the operator or bystanders, or damage to the vehicle or
surrounding property.
After you have configured the vehicle, check to make sure that the vehicle
performs to the specifications entered in the programming procedure. If
the vehicle does not perform to specifications, reprogram it. Repeat this
procedure until the vehicle performs to specifications. If the wanted
operation cannot be reached, contact your service agent.
Ensure that the deceleration parameters are always higher than the
acceleration parameters for a safe response.
It is the responsibility of the health care professional to make sure that
the user is capable of both cognitively understanding and physically
operating the programmed features and functions.
With inappropriate programming settings, certain features and options
may not be accessible or perform as expected.
GBK51948 RHINO2
Installation Manual Issue 5
Programming - Page 55
Programming
To Next Page
Loading...
Need help?
General
