Maintenance – Planned maintenance
10-03-2022 4812331840EN 93
Maintenance – 250/750/1250/1750h
Park the roller on a level surface.
When checking and making adjustments, the
engine should be switched off and the
emergency/parking brake should be applied, if
not otherwise specified.
Ensure that there is good ventilation (air
extraction) if the engine is run indoors. Risk
of carbon monoxide poisoning.
Rear axle differential – Check oil level
Do not work under the roller with the engine
running. Park on a level surface.
Wipe clean and remove the level plug (1) and check that the oil
level reaches the lower edge of the opening. Top off with oil to
the right level if the level is low. Use transmission oil according
to the lubricant specification.
Wipe clean and replace the plug.
Rear axle planetary gears – Check oil level
Position the machine so that the plug is at “9 o’clock”.
Wipe clean and remove the level plug (1) and check that the oil
level reaches the lower edge of the plug hole. Replenish the oil
to the right level if the level is low. Use transmission oil. See
lubricant specification.
Wipe clean and replace the plug.
Check the oil level in the same way on the rear axle's
other planetary gear.
Fig. Level check – planetary gear
1. Refill/level plug
Fig. Level check – Rear Axle
1. Level plug
2. Filling plug
To Next Page
Loading...
Need help?
General
