Safety - when operating
4812165301.pdf 2022-09-02
Work driving
To exit the cab in an emergency, release the
hammer on the rear right post and break the rear
window.
To exit the cab in an emergency, release the
hammer on the rear right post and break the rear
window.
Dynapac always recommends mounted ROPS
(Roll Over Protective Structure), or a
ROPS-approved cab and seat belt usage.
Dynapac always recommends mounted ROPS
(Roll Over Protective Structure), or a
ROPS-approved cab and seat belt usage.
Avoid operating close to edges and ditches and the
like as well as on poor ground conditions that
jeopardizes the bearing strength and capacity to
support the roller. Pay attention to potential obstacles
above the machine, such as overhead cables and the
branches of trees etc.
Pay particular attention to the stability of the substrate
when compacting close to edges and holes. Do not
compact with a large overlap from the previous track in
order to maintain roller stability. Consider other
compaction methods such as remote-control or a
walk-behind roller close to steep slopes or where the
bearing strength of the substrate is unknown.
8
To Next Page
Loading...
Need help?
General