Dynapac CA3500DCP - Propulsion, Engine, and Emissions Specifications

Technical specifications
4812165301.pdf 2022-09-02
Propulsion
CA3500DCP
Propulsion
CA3500DCP
ATC (AntiSpin)ATC (AntiSpin)
Speed range km/h (mph) 0-12 (0-7.5)Speed range km/h (mph) 0-12 (0-7.5)
Climbing capacity
(theoretical) without
vibration, forward
% XXClimbing capacity
(theoretical) without
vibration, forward
% XX
General
EngineEngine
Manufacturer/Model Cummins F 3.8 (V/T4F) Water-cooled turbo-dieselManufacturer/Model Cummins F 3.8 (V/T4F) Water-cooled turbo-diesel
Power output (SAE J1995), 2200 rpm 100 kW 134 hpPower output (SAE J1995), 2200 rpm 100 kW 134 hp
Engine speedEngine speed
- idling 900 rpm- idling 900 rpm
- loading/unloading 1600 rpm- loading/unloading 1600 rpm
- work/transport 2 200 rpm- work/transport 2 200 rpm
Stage V Cummins engines require the use of Ultra Low Sulphur Diesel (ULSD) fuel,
which has a sulphur content of 15 ppm (parts per million) or less. Higher sulphur
contents cause operating problems and put the useful life of components at risk,
which can lead to engine trouble.
Stage V Cummins engines require the use of Ultra Low Sulphur Diesel (ULSD) fuel,
which has a sulphur content of 15 ppm (parts per million) or less. Higher sulphur
contents cause operating problems and put the useful life of components at risk,
which can lead to engine trouble.
CO
2
-emission
CO
2
-emissions measured according to applicable test
cycle in Regulation (EU) 2016/1628.
Manufacturer/Model Test-cycle CO
2
-emission
(g/kWh)
Manufacturer/Model Test-cycle CO
2
-emission
(g/kWh)
Cummins F 3.8 Stage V NRTC 717.1Cummins F 3.8 Stage V NRTC 717.1
NRTC: Non-road transient test cycles.NRTC: Non-road transient test cycles.
20