Maintenance - Lubricants and symbols
4812165301.pdf2022-09-02
Maintenance - Lubricants and symbols
Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating,
resulting in rapid wear.
Always use high-quality lubricants and the
amounts recommended. Too much grease or
oil can cause overheating,
resulting in rapid wear.
Fluid volumesFluid volumes
Rear axle (No-Spin)Rear axle (No-Spin)
- Differential 12,5 liters 13.2 qts- Differential 12,5 liters 13.2 qts
- Planetary gear 1,9 liters/side 2.0 qts/side- Planetary gear 1,9 liters/side 2.0 qts/side
DrumDrum
- Drum gear 2,5 liters 2.6 qts- Drum gear 2,5 liters 2.6 qts
- Drum cartridge 2,2 liters/side 2.3 qts/side- Drum cartridge 2,2 liters/side 2.3 qts/side
Hydraulic reservoir 41 liters 10.8 galHydraulic reservoir 41 liters 10.8 gal
Oil in hydraulic system 80 liters 21.1 galOil in hydraulic system 80 liters 21.1 gal
Diesel engineDiesel engine
- Lubricating oil (incl. filter
replacement)
12 liters 12.7 qts- Lubricating oil (incl. filter
replacement)
12 liters 12.7 qts
- Coolant, without cab 27.2 liters 28.8 qts- Coolant, without cab 27.2 liters 28.8 qts
- Coolant, with cab 29.6 liters 31.3 qts- Coolant, with cab 29.6 liters 31.3 qts
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures.
See the ‘Special instructions’ chapter, or
consult Dynapac.
Other fuel and lubricants are required when
operating in areas with extremely high or
extremely low ambient temperatures.
See the ‘Special instructions’ chapter, or
consult Dynapac.
ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F)
Dynapac Engine 200 P/N 4812161855 (5 liters),
P/N 4812161856 (20 liters)
ENGINE OIL Air temperature -15°C - +50°C
(5°F-122°F)
Dynapac Engine 200 P/N 4812161855 (5 liters),
P/N 4812161856 (20 liters)
HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-122°F)
Dynapac Hydraulic 300 P/N 4812151868 (20 litres),
P/N 4812161869 (209 liters)
HYDRAULIC FLUID Air temperature -15°C - +50°C
(5°F-122°F)
Dynapac Hydraulic 300 P/N 4812151868 (20 litres),
P/N 4812161869 (209 liters)
Ambient air temperature above
+40°C (104°F)
Shell Tellus S2 V100Ambient air temperature above
+40°C (104°F)
Shell Tellus S2 V100
BIOLOGICAL
HYDRAULIC
FLUID, PANOLIN
Air temperature -10°C - +35°C
(14°F-95°F)
When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up.
PANOLIN HLP Synth 46
(www.panolin.com)
BIOLOGICAL
HYDRAULIC
FLUID, PANOLIN
Air temperature -10°C - +35°C
(14°F-95°F)
When it leaves the factory, the
machine may be filled with
biologically degradable fluid.
The same type of fluid must be
used when changing or topping
up.
PANOLIN HLP Synth 46
(www.panolin.com)
DRUM OIL Air temperature -15°C - +40°C
(5°F-104°F)
Dynapac Drum Oil 1000 P/N 4812161887 (5 liters),
P/N 4812161888 (20 liters)
DRUM OIL Air temperature -15°C - +40°C
(5°F-104°F)
Dynapac Drum Oil 1000 P/N 4812161887 (5 liters),
P/N 4812161888 (20 liters)
103
To Next Page
Loading...
Need help?
General