Dynapac CA3500DCP User Manual

Machine description
4812165301.pdf 2022-09-02
Function descriptions
No Designation Symbol FunctionNo Designation Symbol Function
1 Ignition key The electric circuit is broken.1 Ignition key The electric circuit is broken.
All instruments and electric controls are supplied with
power.
All instruments and electric controls are supplied with
power.
Starter motor activation.Starter motor activation.
To start: Turn ignition key to the right until the
display LIGHTS UP, and wait until the displayed
roller GOES OFF and changes to the status image.
To start: Turn ignition key to the right until the
display LIGHTS UP, and wait until the displayed
roller GOES OFF and changes to the status image.
2 Forward/Reverse lever NB! When starting the machine, the lever must be in
neutral. The engine cannot be started if the
forward/reverse lever is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward; when the lever is
move backward, the roller moves backward.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed.
2 Forward/Reverse lever NB! When starting the machine, the lever must be in
neutral. The engine cannot be started if the
forward/reverse lever is in any other position.
The forward/reverse lever controls both the roller's
driving direction and speed. When the lever is moved
forward, the roller moves forward; when the lever is
move backward, the roller moves backward.
The roller's speed is proportional to the distance the
lever is from the neutral position. The further the lever
is from the neutral position, the higher the speed.
3 Forward/Reverse activation
buttons
The float mode is activated by pressing and holding
the button for 2 seconds while the machine is in
Working mode (14) and Strike-off blade (16) is
activated.
3 Forward/Reverse activation
buttons
The float mode is activated by pressing and holding
the button for 2 seconds while the machine is in
Working mode (14) and Strike-off blade (16) is
activated.
Vibration drum off/on One press starts the vibration for the drum, the next
press stops the vibration.
Vibration drum off/on One press starts the vibration for the drum, the next
press stops the vibration.
Compaction plates, up/down Raising/lowering of the compaction plates is possible
when the machine is in operating position (14).
Compaction plates, up/down Raising/lowering of the compaction plates is possible
when the machine is in operating position (14).
Compaction plates, offset
adjustment
Offset adjustment of the compaction plates is possible
when the machine is in operating position (14).
Compaction plates, offset
adjustment
Offset adjustment of the compaction plates is possible
when the machine is in operating position (14).
Vibration, compaction plates One press starts the compaction plate vibration, the
next press stops the vibration. This function is possible
when the machine is in operating position (14).
Vibration, compaction plates One press starts the compaction plate vibration, the
next press stops the vibration. This function is possible
when the machine is in operating position (14).
5 Lamp indication, compaction plate
centering
The lamp turns on/illuminates when the compaction
plates are centered.
5 Lamp indication, compaction plate
centering
The lamp turns on/illuminates when the compaction
plates are centered.
6 Vibration frequency, compaction
plates
The vibration frequency of the compaction plates can
be adjusted/adapted with the control.
6 Vibration frequency, compaction
plates
The vibration frequency of the compaction plates can
be adjusted/adapted with the control.
7 Central warning indication General fault indication. See the display (33) for
description of the fault.
For detailed information about the fault indication, see
the table "Warning indication - membrane panel".
7 Central warning indication General fault indication. See the display (33) for
description of the fault.
For detailed information about the fault indication, see
the table "Warning indication - membrane panel".
Yellow warning light - "less serious fault"Yellow warning light - "less serious fault"
Warning lights red - "serious fault"Warning lights red - "serious fault"
8 Direction indicator (Optional) Shows direction indicators activated (Activated via the
steering column switch).
8 Direction indicator (Optional) Shows direction indicators activated (Activated via the
steering column switch).
9 Main beam indicator (Optional) Shows main beam activated (Activated via the steering
column switch).
9 Main beam indicator (Optional) Shows main beam activated (Activated via the steering
column switch).
36

Dynapac CA3500DCP Specifications

General

Brand	Dynapac
Model	CA3500DCP
Category	Power Roller
Language	English