xLogic SuperRelay Users Manual
10
xLogic devices：
xLogic Basic is available in two voltage classes:
*Classes 1: DC12-24V: i.e.: ELC-18DC Series and ELC-12DC Series.
*Classes2:AC110-240V: i.e.: ELC-18AC Series and ELC-12AC
Series
In the versions:
* With Display: ELC-18 Series (12 inputs and 6 outputs)
* Without Display: ELC-12 Series (8 inputs and 4 outputs)
ELC-18 Series is equipped with an expansion bus (Can Bus)
Each Version is provides 36 pre-configured standard and special function blocks for the
creation of your circuit program.
Expansion modules:
* xLogic digital modules are available for operation with 12…24V DC, and 110.. .240 V AC,
and are equipped with eight inputs and eight outputs.
* xLogic analog modules are available for operation with 12…24 V DC and are
equipped with six digital and two analog inputs.
Communication modules:
xLogic:RS232 communication module (type:ELC-RS232)
It is kind of universal module with photoelectricity isolation which can be directly
connected to standard 9-pin port of PC, also kind of interface module which can
enable user’s program to be downloaded into xLogic main module through
xLogicsoft for running.
xLogic: USB communication module (type: ELC-USB).
It is kind of communication module with photoelectricity isolation through which
PC with USB port only can be connected to xLogic main module, moreover, it has
same features as ELC-RS232 module, so it is quite convenient for user whose
To Next Page
Loading...
Need help?
General