Eaton EMR-3MP0 - Page 186

URTDII Module Fiber Optic Connection to the Protective Device
URTD
Optical Fiber for URTD Communications to Protective Device
Connect to Terminal X102
Protective Relay
UrtdProxy_F11
Operational
Info
Ack/Rst
Ok
CTRL
The 󰊎gure above shows the 󰊎ber optic connections between the URTDII Module and the
protective device. The protective device supports the optical 󰊎ber connection. The
following table lists the 󰊎ber optic order options.
Fiber Optic Order Options
Cutler-Hammer Agilent Technologies
Length Catalog Number Number
3.3 ft (1 m) MPFO-1 HBFR-ELS001 or HBFRRLS001
16.4 ft (5 m) MPFO-5 HBFR-ELS005 or HBFRRLS005
32.8 ft (10 m) MPFO-10 HBFR-ELS010 or HBFRRLS010
82.0 ft (25 m) MPFO-25 HBFR-ELS025
164.0 ft (50 m) MPFO-50 HBFR-ELS050
246.1 ft (75 m) MPFO-75 HBFR-ELS075
249.3 ft (76 m) MPFO-76 HBFR-ELS076
328.1 ft (100 m) MPFO-100 HBFR-ELS100
393.7 ft (120 m) MPFO-120 HBFR-ELS120
Uncut Fiber HBFR-EUS (Length)
186 www.eaton.com EMR-3MP0
4 Protective Elements
4.14 URTDII Module Interface