Eaton EMR-3MP0 - Time Synchronization IRIG-B00 X

Time Synchronization IRIG-B00X
Nominal input voltage: 5 V
Connection: Screw-type terminals (twisted pair)
RS485*
*availability depends on device
Connection: 9-pole D-Sub socket (external terminating
resistors/in D-Sub)
or 6 screw-clamping terminals RM 3.5 mm (138
MIL) (terminating resistors internal)
CAUTION!
In case that the RS485 interface has terminals, the communication cable has to be
shielded.
Fiber Optic*
*availability depends on device
Master/Slave: Slave
Connection ST plug
URTD-Interface*
*availability depends on device
Connector: Versatile Link
Boot Phase
After switching on the power supply the protection is available in approximately 6
seconds.
After approximately 15 seconds (depending on the con󰊎guration) the boot phase is
completed (HMI and communication initialized).
243www.eaton.comEMR-3MP0
10 Technical Data EMR-3MP0