C-62 IM02601001E www.eaton.com
Modbus Register Maps
80E9 - 80E9 33002 - 33002 Source for Pulse Ouput#1 UINT16 enumeration -----ppp ----vvvv "ppp" (Phase) : 000
= none, 001 = Phase
A, 010 = Phase B,
011 = Phase C, 100
= All Phases, 101 =
Pulse from EOI(End Of
Interval).
"vvvv"(Value) :
0000= none,
0001 = Wh,
0010 = +Wh,
0011 = -Wh,
0100= Varh,
0101 = +Varh,
0110 = -Varh,
0111 = VAh,
1000= Received Wh,
1001= Delivered Wh,
1010= Inductive Varh,
1011 = Capacitive Varh
1
80EA - 80EA 33003 - 33003 Kt [Wh/pulse] factor for Pulse Output#1 UINT16 bit-mapped ddVVVVVV VVVVVVVV "V…V" = not scaled
energy value per pulse,
from 0 to 9999.
"dd"= decimal point
position: 00=0.XXXX,
01=X.XXX, 10=XX.XX,
11= X.XXX.
1
80EB - 80EC 33004 - 33005 Output#2 Assignment and Kt UINT16 Same as Output #1. 2
80ED - 80EE 33006 - 33007 Output#3 Assignment and Kt UINT16 Same as Output #1. 2
80EF - 80F0 33008 - 33009 Output#4 Assignment and Kt UINT16 Same as Output #1. 2
80F1 - 80F1 33010 - 33010 Input Accumulators Scaling UINT16 bit-mapped 44443333 22221111 See Relay Card above. 1
80F2 - 80F2 33011 - 33011 Output Accumulators Scaling UINT16 bit-mapped 44443333 22221111 1
80F3 - 8126 33012 - 33063 Reserved
Set to 0. 52
Block Size: 63
Settings Registers for Analog Out 0-1mA / Analog Out 4-20mA Cards Second Overlay write only in PS update
mode
8127 - 8127 33064 - 33064 Update rate UINT16 0 to 65535 milliseconds Set to 0. 1
8128 - 8128 33065 - 33065 Channel direction - 1mA Card only! UINT16 bit-mapped -------- ----4321 Full range output for
0-1mA card only: A bit
set(1) means full range
(-1mA to +1mA); a bit
cleared(0) means source
only (0mA to +1mA).
1
8129 - 8129 33066 - 33066 Format parameter for output #1 UINT16 bit-mapped -------- ---f suwb Format of the polled
register:f=float 32;
s=signed 32 bit int;
u=unsigned 32 bit int;
w=signed 16 bit int;
b=unsigned 16 bit int.
1
To Next Page
Loading...
