6 Drives control
6.3 Motor
110 DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
P-10 138 ✓ rw 0 - 30000 rpm
(min
-1)
Nominal speed of the motor 0
(￫ motor rating plate)
Note:
This parameter can be optionally set to the motor's rated speed (revo-
lutions per minute, rating plate). If it is set to a value of 0 (the default
setting), all speed-related parameters will be shown in Hz. In addition,
the slip compensation function for the motor will be locked. Entering
the value on the motor's rating plate will unlock the slip compensation
function, and the variable frequency drive's display will show the motor
speed in the estimated rpm. All speed-related parameters (such as the
minimum and maximum frequencies and the fixed frequencies) will
also be shown in rpm.
PNU
ID Access rights Value Description DS
RUN ro/rw
To Next Page
Loading...
