8 Modbus RTU
8.3 Operating mode Modbus RTU
146 DC1 variable frequency drive 12/13 MN04020003Z-EN www.eaton.com
Type (ID 12)
Rated powers (ID 13)
Together with the second value from register 12, the value in this register
gives the device's output.
Examples:
Register 12 = x1x0h
Register 13 = 15
The device has an output of 1.5 kW
Voltage (ID 14)
Specifies the device's specified input voltage.
Example: 230
230 V
Control part software version (ID 15)
Specifies the software version of the control section with two decimal
places.
Power section software version (ID 16)
Specifies the software version of the power section with two decimal places.
Variable frequency drive recognition (ID 17)
The device's unique serial number.
x x x x (hex) Explanation
Default settings (country-specific)
0 = kW
1 = HP
Part
4 = DC1
Power rating
0 = No decimal places
1 = One decimal place
2 = Two decimal places
Size (FS)
1 = FS1
2 = FS2
3 = FS3
To Next Page
Loading...
