2.6 Personnel requirements
Manufacturer
Certain work may only be carried out by specialist staff of the manufacturer or by staf
f
authorised or specially trained by the manufacturer. Other people or personnel are not
authorised to carry out this work.
To carry out the work required, please contact our customer service.
Mechanic
The mechanic is trained for the particular range of tasks in which he operates and knows
the relevant standards and regulations.
The mechanic can perform work on pneumatic and hydraulic systems because of his/her
specialized training and experience and can independently recognise and avoid potential
dangers.
Operator
The operator has been instructed by the owner on the tasks entrusted to it and is aware of
the potential dangers associated with incorrect behaviour. The operator is only permitted
to carry out tasks that go beyond the scope of normal operation if these tasks are
specified in these instructions and the owner has authorised the operator to do so.
Production supervisor
The production supervisor is capable of performing the work assigned to them because of
their technical training, knowledge and experience, as well as awareness of the relevant
standards and regulations; they are able to autonomously identify and prevent potential
risks. The production supervisor is authorised to give orders to other listed personnel.
The production supervisor or authorised personnel are responsible for parameterisation of
the system.
Qualified electrician
Qualified electricians are able to carry out the work on electrical systems because of their
technical training, knowledge and experience, as well as awareness of the relevant
standards and regulations; qualified electricians are capable of independently identifying
and preventing potential risks. Qualified electricians are specially trained for the type of
work they do and are familiar with the relevant standards and regulations.
Servicing personnel
Certain works may only be performed by servicing personnel from the manufacturer or
those authorised by the manufacturer or servicing personnel that are specially trained for
this Other people or personnel are not authorised to carry out this work.
To carry out the work required, please contact our customer service.
Specialist
A person with appropriate training, schooling and experience enabling him or her to
identify risks and avert danger.
Safety
12Rev. 1-06.2018
To Next Page
Loading...
Need help?
General