Gear scale
Gear scale table defines how to scale TC Delta RPM RAW depending on current gear. The lower
the gear, the value in the table should also be lower. The value of 100% means no scale of TC
Delta RPM RAW.
Adjust scale
Adjust scale table is used to define how the TC Delta RPM RAW value should be scaled
depending on rotary switch / potentiometer position. The value of 0% means no traction control.
The discrete positions of rotary switch / potentiometer are defined in Traction control / Adjust scale
calibration table.
Adj. cal.
Adjust scale calibration table is used to define the voltage for each discreet position (1-10) of rotary
switch or potentiometer. More information about TC can be found in Traction control section.
Torque reduction
Torque reduction table is used to define torque reduction in function of load and TC Delta RPM
value. The value of 0% means no torque reduction (no spark event to be skipped), 100% means
no torque (all spark events skipped).
WARNING !
Torque reduction is performed by spark cutting and may lead to catalytic
converter damage or destruction.
Page 115
To Next Page
Loading...