OTHER
Tables switch
Tables switch options are used to define how the tables will be change. The tables that can be
switched have suffix #1 and #2. Tables can be change via switch or automatically when the VTEC
option is activated. There is also an option to interpolate between tables based on external signal
such as fuel ethanol content from FlexFuel sensor readings. In the case of boost tables switching it
is defined in Boost/Parameters options.
Information about current table set can be found on the application status bar (TBL SET).
PARAMETER DESCRIPTION
Tables switch mode
Do not switch tables - table switch function is disabled
Switch with user input - switching tables using switch connected to
one of the EMU inputs
VTEC Switch - automatic switch when the VTEC solenoid is activated
FlexFuel blend - dual tables are used for interpolation based on
FlexFuel configuration
Tables switch input
The EMU input used for tables switch. More information about
switches can be found in User switches section
Switch VE table Activation of switching VE tables
Switch IGN table Activation of switching IGN tables
Switch AFR table Activation of switching AFR tables
Switch CAM #1 table Activation of switching VVTi tables for CAM #1
Switch CAM #2 table Activation of switching VVTi tables for CAM #2
Switch cranking fuel Activation of switching Cranking fuel tables
Switch warmup
enrichment
Activation of switching Warmup enrichment tables
Page 116
To Next Page
Loading...