Firmware upgrade
To upgrade firmware please choose option Upgrade firmware from File menu. After selecting
proper firmware version press Open button. The upgrade should begin immediately. Do not turn of
the device during firmware upgrade! When upgrade is finish turn off the device. The process is
finished. All parameters and tables are automatically imported.
If the upgrade process fails, turn off device, turn it back on, and repeat the procedure.
ATTENTION !
In case of firmware upgrade failure the project should be saved on a disc before
updating!
ATTENTION !
Firmware upgrade should not be performed if there are problems with the
communication between the device and PC computer and if car or laptop
batteries are not fully charged!
ATTENTION !
Before you perform firmware upgrade, please disconnect injectors and ignition
coils !
Page 13
To Next Page
Loading...