Edgetech 4200 User Manual

D-2
4200 SIDE SCAN SONAR SYSTEM USER HARDWARE MANUAL 0004842_REV_N
Paragon software will load:
7. Click Cancel under Confirm Network (if applicable).
8. Click Post-mortem Restore.
9. Select Recovery Media and Product and s/n.
10. Click Next.
11. Select Basic MBR Hard Disk number and click Next.
12. Select the drive to restore the archive to and click Next.
13. Do not select any options and click Next.
14. Click Yes, Apply these changes physically.
15. Click Next.
16. After the restore is complete, reboot the PC and right-click on Computer>Properties.
If you have internet access, do the following:
17. Set the direct LAN connection to automatic and connect ETHERNET cable.
18. Click the Change Windows Key
19. Type the correct ID.
20. Activate this ID and affix sticker to the rear of the computer.
21. Reset the direct LAN connection to 192.9.0.99.
22. Set the wireless connection to 192.9.0.100, and rename it, removing the wireless number.
23. Rename the computer to product type-xxxxx.
If you do not have Internet access, call 888-725-1047. This is the direct number to Windows 10
Professional Activation help.

Edgetech 4200 Specifications

General

Brand	Edgetech
Model	4200
Category	Sonar
Language	English