Edgetech 4200 User Manual

3-4
4200 SIDE SCAN SONAR SYSTEM USER HARDWARE MANUAL 0004842_REV_N
3.5 Topside Processor Controls and Indicators
The following sub-sections describe the controls and indicators for the three 4200 Series topside
processor options. Labeled photos of these panels are provided in F
IGURE 3-1 and
F
IGURE 3-2 for the Rack Mount Topside, FIGURE 3-3 for the Portable Topside, and FIGURE 3-4 for the 701-DL
Digital Link.
3.5.1 4200 Rack Mount Topside Processor Controls and Indicators
The 4200 Rack Mount Topside Processor includes controls and indicators on the front and back panels, as
shown in F
IGURE 3-1and FIGURE 3-2. Note the DVD and removable 1-TB drives located on the front panel,
as these are unique to the Rack Mount processor option.
The 4200 Rack Mount Topside Processor controls and indicators are the following:
POWER: Rocker switch. Switches AC power to the 4200 Rack Mount Topside
Processor. This switch can be left in the ON position at all times.
SYSTEM POWER: Push-button toggle switch. Turns the 4200 Rack Mount (switch) Topside
Processor ON or OFF.
FISH POWER: Push-button toggle switch. Applies power to the tow vehicle.
(switch)
RESET: Momentary push button switch. Resets the 4200 Rack Mount Topside
Processor.
FISH POWER: Red indicator. Illuminated when power is being applied to the tow
vehicle.
(indicator)
HDD: Yellow indicator. Flashes when a hard drive on the 4200 Rack Mount
Topside Processor is being accessed.
SYSTEM POWER: Green indicator. Illuminated when the 4200 Rack Mount Topside
(indicator) processor is on.

Edgetech 4200 Specifications

General

Brand	Edgetech
Model	4200
Category	Sonar
Language	English