D-1
APPENDIX D: BACKUP AND RESTORE
The following section outlines the procedures for backing up and restoring the system drive.
D.1 Backing up the System Drive
To back up the system drive:
1. Insert image disk into a USB slot and boot the computer.
1. To enter setup, press F2 for laptops or Del for rack-mount systems.
2. Go to Boot and change HDD BBS Priorities.
3. Highlight option 1 and change to Image Disk.
4. Confirm Boot Option Priorities are set to DVD, then Image Disk.
5. Save and Exit.
Paragon software will load:
6. Click Cancel under Confirm Network (if applicable).
7. Select Post-mortem Backup, and then click Next.
8. Ensure all checkboxes below are checked (First hard disk track & Master book record & OS Part
(C:)
9. Click Next, and then select save data to local/network drives.
10. Click Next, and then select Recovery Media OR Group # PC# (if reusing a flash drive).
11. Name archive group, product, and s/n. Then click next.
12. Insert the date for the comment (e.g., 2/23/2013). Then click next.
13. You have now successfully backed up the system.
D.2 Restoring the System Drive
1. Insert the Image Disk into a USB slot and boot computer.
2. Press F2 for laptops and Del for rack-mount systems.
3. Go to Boot and change HDD BBS Priorities.
4. Highlight option one and change to Image Disk
5. Confirm Boot Option Priorities are set to DVD, then Image Disk.
6. Save and Exit.
To Next Page
Loading...
Need help?
General
