Edimax CAP1750 - Page 145

Edimax Pro NMS
139
Radio Group Settings
Domain
Set the regulatory domain for the access
point’s wireless channels for each frequency.
Wireless
Enable or disable the access point group’s
2.4GHz or 5GHz wireless radio. When
disabled, no SSIDs on that frequency will be
active.
Band
Select the wireless standard used for the
access point group. Combinations of 802.11b,
802.11g, 802.11n & 802.11ac can be selected.
Auto Pilot
Enable/disable auto channel selection. Auto
channel selection will automatically set the
wireless channel for the access point group’s
2.4GHz or 5GHz frequency based on
availability and potential interference. When
disabled, select a channel manually.
Auto Pilot Range
Select a range from which the auto channel
setting (above) will choose a channel.
Auto Pilot Interval
Specify a frequency for how often the auto