TP-00347-01 15
Controls and Indicators
Tape Drive Back Panels
For best performance, use the appropriate HBA for your tape drive. A lower throughput HBA
might result in performance degradation when backing up high
ly compressible data to a
higher throughput tape drive.
In a SAN installation, all switches between the host and the library must be of the
appropriate type. A lower throughput switch
in the path may result in performance
degradation. Configure zoning so only the backup servers may access the library.
IBM LTO-5/6/7/8 HH SAS
FC Half-Height Drive
Library Controller
To Next Page
Loading...