TP-00347-01 99
Error Codes
Sub Error Codes Related to Media Changer
F5 Drive Unload Timeout Retry operation; if not successful
contact technical support
Drive probably defective.
Drive has run in a timeout while
unloading a tape
Drive leader bent.
The sub code indicates which
driv
e is affected
Drive initialize repeatedly.
Drive defect (no function).
F8 Invalid drive command Retry operation; if not successful
conta
ct technical support
Drive probably defective.
F9 Invalid drive parameter Retry operation; if not successful
conta
ct technical support
Drive probably defective.
FA SDCI microcode error Retry operation; if not successful
conta
ct technical support
Drive probably defective.
FB Drive logged out Retry operation; if not successful
conta
ct technical support
Drive probably defective.
FC Internal SCSI command failed
with check
condition
Retry operation; if not successful
contact technical support
Drive probably defective.
FD Internal SCSI command timeout Retry operation; if not successful
conta
ct technical support
Drive probably defective.
Error
C
ode Description User Action Critical Component Status
Code Description
01 Mechanical initialization failure
02 Connection to slave media changer failed
03 Error motor initialization
04 Error during gripper close
05 Error slider home positioning
06 Error elevator home movement
07 Error during sled movement to rotation position
08 Error during rotation initialization, get
range failed
09 Error elevator initialization
0A Error during rotation to far position
0B Error first sled initialization, move to sensor failed
0C Error during sled movement to rotation position
0D Error during rotation to drive position
0E Error slider initialization, get range failed
0F Error during slider forward movement
10 Error gripper initialization
, get range failed
11 Error during slider home movement
12 Error during rotation to FAR position
To Next Page
Loading...