EditShare 24Q - Main Error Codes

TP-00347-01 89
Error Codes
Main Error Codes
Error
Code Description User Action Critical Component Status
80 Barcode Reader Error, cannot
initialize B
CR
Retry operation; after several
occurrences contact technical
support
Media changer probably
defective.
Flexi cable to BCR not properly
con
nected.
Flexi cable to BCR damaged.
Barcode engine defect.
81 Barcode Reader Error, no
r
esponse from BCR
Retry operation; after several
occurrences contact technical
support
Media changer probably
defective.
Flexi cable to BCR not properly
con
nected.
Flexi cable to BCR damaged.
Barcode engine defect.
82 EEPROM Error, no response from
EEPROM (loca
ted on media
changer controller)
Retry operation; after several
occurrences contact technical
support
Media changer probably
defective.
Media changer controller not
w
orking (hardware problem,
EEPROM defect).
83 Media changer controller generic
pr
oblem
Reset the unit and retry
operation. After several
occurrences contact technical
support
Media changer probably
def
ective.
Media changer hardware not
wo
rking (cables, distribution
boards, media changer
controller).
84 Setting of gripper motor
paramet
ers failed
Reset the unit and retry
operation. After several
occurrences contact technical
support
Media changer probably
def
ective.
Elevator distribution board
def
ect.
Cabling incorrect.
85 Setting of slider motor
paramet
ers failed
Reset the unit and retry
operation. After several
occurrences contact technical
support
Media changer probably
def
ective.
Elevator distribution board
def
ect.
Cabling incorrect.
86 Setting of elevator motor
paramet
ers failed
Reset the unit and retry
operation. After several
occurrences contact technical
support
Media changer probably
def
ective.
Elevator distribution board
def
ect.
Cabling incorrect.
87 Setting of rotation motor
paramet
ers failed
Reset the unit and retry
operation. After several
occurrences contact technical
support
Media changer probably
def
ective.
Media changer controller defect.