EasyManua.ls Logo

EditShare 24Q - Warnings and Cautions

Default Icon
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TP-00347-01 3
Warnings and Cautions
Warning - High Voltage
Mains voltages are present in this product. Risk of Electric Shock.
Do not remove covers (top, bottom or rear).
No user-serviceable parts are inside.
Refer servicing to qualified service personnel.
Warning - Product Weight
Risk of personal injury. Before lifting a module:
Observe local health and safety requirements a
nd guidelines for manual material
handling.
When moving the unit, remove all tape to reduce the weight.
When moving the unit, remove all tape drives to reduce the weight.
Obtain adequate assistance to lift and stabilize the module during installation or
removal.
When placing a module into or removing the
module from a rack:
Extend the rack's levelling jacks to the floor.
Ensure that the full weight of the rack rests on the levelling jacks.
Install stabilizing feet on the rack.
Extend only one rack component at a time.
Caution - Static Sensitive Devices
Risk of damage to devices:
A discharge of static electricity damages static-sensitive devices
or micro circuitry.
Proper packaging and grounding techniques are necessary precautions to
prevent damage.
Caution - Working Environment
Risk of damage to devices:
Ventilation - Place the product in a location that does not interfere with proper
ventilation.
Heat - Place the product in a location away from heat sources.
Power sources - Connect the product to a power source only of the type directed
in the operating instructions or as marked on the product.
Power cord protection - Place the AC line cord so that it is not possible to be
walked on or pinched by items placed upon or against it.
Object and liquid entry - Make sure that objects do not fall onto and that liquids
are not spilled into the product's enclosure.

Table of Contents