EditShare 24Q - Tape Library

TP-00347-01 67
Partitioning the Library
48Q Tape Library
48Q Single Partition Configuration
Tape drive 1: half-height drive (default element addresses = 256 )
Tape drive 2: half-height drive (default element addresses = 257 )
Tape drive 3: half-height drive (default element addresses = 258 )
Tape drive 4: half-height drive (default element addresses = 259 )
Magazines: #1 through #4
48Q Dual Partition Configuration
Partition 1
Tape drive 1: half-height drive (default element address = 256)
Tape drive 2: half-height drive (default element address = 257)
Magazines: #1 and #2
Partition 2
Tape drive 3: half-height drive (default element address = 256)
Tape drive 4: half-height drive (default element address = 257)
Magazines: #3 and #4
The mailslot (if configured as MAIL) is shared between the logical libraries.
48Q Three Partition Configuration
The mailslot (if configured as MAIL) is shared between the logical libraries.
Partition 1
Tape drive 1: half-height drive (default element address = 256)
Magazines: #1
Partition 2
Tape drive 2: half-height drive (default element address = 256)
Magazines: #2
Partition 3
Tape drive 3: half-height drive (default element address = 256)
Tape drive 4: half-height drive (default element address = 257)
Magazines: #3 and #4