100 TP-00347-01
Chapter 6: Troubleshooting
13 Error sled initialization, move to sensor failed
14 Error during sled move - check shipping lock
20 Error Inventory scan
21 Error during gripper close
22 Error slider home movement
23 Error during move gripper to scan pos
24 Error reading barcode label
25 Error during move sled to scan position
26 Error during move elevator to scan position
27 Error during sled preposition movement
29 Error during closing gripper
2A Error slider preposition movement
2B Error during opening gripper
2C Error during sled movement up to sensor
2D Error slider preposition backwards movement
30 Error slot preposition
31 Error during sled movement in <FLMoveRotation> function
32 Command sending to media changer failed
33 Error during elevator movement in <FLMoveRotation> function
34 Error during rotation in <FLMoveRotation> function
35 Error during elevator movement in <FLMoveSled> function
36 Error during sled movement in <FLMoveSled> function
37 Error during sled positioning to sensor in <
FLMoveSled> function
38 Error during sled positioning to mailslot in <FLMoveSled>
fu
nction
39 Error during sled positioning without sensor
3A Error during elevator movement without sensor
3B Error slot position sensor not found
40 Movement to/from slot failed
41 Error during first slider movement
42 Error during first gripper movement
43 Error during second slider movement
44 Error during second gripper movement, get range failed
45 Error during third slider movement, move home failed
46 Error during set hold current to avoid torsion
50 Preposition to drive failed
51 Elevator movement to home sensor failed
52 Sled movement to home sensor failed
53 Error during sled movement to drive position
54 Error during rotation to drive position
55 Error during elevator movement in drive position
56 Error during sled movement to rotation position
Code Description
To Next Page
Loading...