To Next Page

To Previous Page

112 Installation and Service Guide: Printer Controller EB-34

Specifications

This section provides an overview of EB-34 features, specifications, and safety certifications.

Note: Replacement parts and specifications are subject to change. When ordering replacement parts, refer to the

current parts list maintained by your authorized service/support center. Install the correct parts as directed by your

service/support center.

Hardware features

• 2.9 GHz Intel Pentium dual core G850 CPU

• Memory—4GB (2 x 2GB DIMMs)

• 500GB hard disk drive

• An Ethernet connector for 10BaseT/100BaseTX/1000BaseT Mbs connectivity over twisted pair cable (upper port)

• Built-in DVD-RW drive

Physical specifications

• Operating environment:

• Temperature: +5°C to +40°C

• Relative Humidity: 10%-85% (non-condensing)

• Power supply rating: 100-240V, 50-60Hz, 3A

• Rated Power Consumption: 180W

• Dimensions (height x depth x width):

32.0 cm (12.5 in.)

x 35.5 cm (14.0 in.) x 14.0 cm (5.5 in.)

• Weight: 6.8 kg (15.0 lbs.)

Networking and connectivity

• Supports AppleTalk and TCP/IP protocols simultaneously (for font download only).

• Ethernet connector (upper port) that supports 10BaseT/100BaseTX/1000BaseT twisted pair network connectivity.

• Ethernet connector (lower port) that provides the print and scan interface between the EB-34 and the copier.

EFI EB-34 User Manual

Questions and Answers: