86 Installation and Service Guide: Printer Controller EB-34
Installing System Software
• Compatibility: After you upgrade system software, remind the site administrator to upgrade user software on all
computers connected to the EB-34. Using old user software with new system software may negatively affect the
system.
Installing system software
Install both system software DVDs when you replace a hard disk drive or upgrade to the latest version of the EB-34
software. You can install software from the following disks:
• System Software DVD 1— Fiery System Software for the EB-34.
• System Software DVD 2 and 3—Windows operating system.
• User Software DVD 4—Fiery User Software for installation on the EB-34 and client computers.
To install and verify the system software installation
Follow these instructions to complete the system software installation:
• “Before you install or upgrade system and user software” on page 86.
• “Installing or upgrading the system and user software with Fiery System installer” on page 86.
• “After installing or updating the system software” on page 87.
• “Verify the EB-34 operation” on page 88.
• “Before you leave the customer site” on page 88.
Before you install or upgrade system and user software
1 Before you proceed, do the following:
• Ask the site administrator to
• Print the Job Log, Server Configuration page, and Font List, if possible.
• If any options are activated on the server, you must deactivate them prior to reinstalling.
• Archive and export to an external hard drive, USB storage device or network folder any customer-installed
fonts and FreeForm masters, if possible.
2 If you are installing system software, back up the system configuration (if possible).
For more information, see page 76.
Installing or upgrading the system and user software with Fiery System installer
Note: You can use the EB-34 control panel to operate Fiery System Installer. You can also use a monitor, mouse, and
keyboard attached if available.
Important: Remove all dongles and devices, on the EB-34 except the keyboard and mouse. If you do not
remove dongles or devices, the system software installation may fail.
To Next Page
Loading...
Need help?
General
