32 Installation and Service Guide: Printer Controller EB-34
Replacing Parts
Replacing Parts
Generally, the EB-34 requires no regular service or maintenance. Use the procedures in this chapter to inspect,
remove, reseat, and replace major hardware components, as well as install system software.
Overview
This chapter includes information about servicing the following components:
• Boards and cables
• Motherboard components (DIMMs, CPU, battery, and jumpers)
• Fan
• Power supply
• Hard disk drive
• DVD drive
Replacement parts are available from your authorized service representative. The terms “replace” and “replacing” are
used throughout this document to mean the reinstallation of existing components. Install new components only when
necessary. If you determine that a component you have removed is not faulty, make sure to reinstall it.
Replacement parts and specifications are subject to change. When ordering replacement parts, refer to the current
parts list maintained by your authorized service/support center. Install the correct parts as directed by your service/
support center.
The tools required to service the EB-34 are listed on “Tools you will need” on page 9.
Caution:When performing the service procedures described in this chapter, follow the precautions listed on
page 9.
To Next Page
Loading...
Need help?
General
