Elan System12 User Manual

ELAN HOME SYSTEMS
© ELAN Home Systems 2004 • All rights reserved. Page 65
SYSTEM12 INSTALLATION MANUAL
Programming (continued)
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
zz:
Zone: 01-32
a:
0 = OFF
1 = ON
2 = TOG
Examples:
• &S12,DND,13,0<cr> turns Zone 13's DND off.
• &S12,DND,02?<cr> queries Zone 2's DND.
• &S12,DND,13,1<cr> turns Zone 13's DND on.
• &S12,DND,13,2<cr> toggles Zone 13's DND from
on to off or off to on.
DRC (Dynamic Range Compression)
Description:
• Turns specified Zone zz's DRC off/on/toggle.
• Has no effect if the zone is off.
Command:
&S12,DRC,zz,a<cr>
Query:
&S12,DRC,zz?<cr>
Reply:
&S12,DRC,zz,a<cr>
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
zz:
Zone: 01-32
a:
0 = OFF
1 = ON
2 = TOG
Examples:
• &S12,DRC,13,0<cr> turns Zone 13's DRC off.
• &S12,DRC,02?<cr> queries Zone 2's DRC.
• &S12,DRC,13,1<cr> turns Zone 13's DRC on.
• &S12,DRC,13,2<cr> toggles Zone 13's DRC from
on to off or off to on.
DB
Description:
• Turns specified DB off/on/toggle. This will initiate a
DB that will route audio present at the S12's Page In
audio jack to zones that have DB enabled.
• Works if the System/Zone is on or off.
• Only chassis one will respond.
Command:
&S12,DB,a<cr>
Query:
&S12,DB?<cr>
Reply:
&S12,DB,a<cr>
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
a:
0 = OFF
1 = ON
2 = Toggle
Examples:
• &S12,DB,0<cr> turns Doorbell off.
• &S12,DB?<cr> queries Doorbell status.
• &S12,DB,2<cr> toggles Doorbell from on to off or
off to on.
GRP (Group)
Description:
• Turns specified Zone zz's Group off/on/toggle.
• Has no effect if the zone is off.
• When group is turned off, all zones in group remain
on.
Zones 01-08 = Groups 01-04
Zones 09-16 = Groups 05-08
Zones 17-24 = Groups 09-12
Zones 25-32 = Groups 13-16
Command:
&S12,GRP,zz,gg,a<cr>
Query:
&S12,GRP,zz,gg?<cr>
Reply:
&S12,GRP,zz,gg,a<cr>

Elan System12 Specifications

General

Brand	Elan
Model	System12
Category	Controller
Language	English