ELAN HOME SYSTEMS
© ELAN Home Systems 2004 • All rights reserved. Page 13
Applications (continued)
Stereo Zones
To create an independent stereo zone, simply connect
the S12’s Variable Zone Audio Outputs to a pair of
amplifier channels. Volume will be controlled using IR
or RS-232 commands at pre-amp level. Any and all
speakers connected to these channels will ramp
volume up/down together. Use a VIA!
®
Touch Panel,
keypad, or hand-held remote control to control
functions (including volume) in zones with this
configuration.
To Next Page
Loading...
Need help?
General
