Elan System12 User Manual

ELAN HOME SYSTEMS
SYSTEM12 INSTALLATION MANUAL
Page 66 © ELAN Home Systems 2004 • All rights reserved.
Programming (continued)
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
zz:
Zone: 01-32
gg:
Group: 01-16
a:
0 = OFF
1 = ON
Examples:
• &S12,GRP,13,05,0<cr> turns Zone 13's Group 1
off.
• &S12,GRP,02,01?<cr> queries Zone 2's Group 1.
• &S12,GRP,13,07,1<cr> turns Zone 13's Group 07
on.
If Zone 2 and Zone 4 are the only zones in GRP 1
and you want to turn GRP 1 on from Zone 8 with Zone
4's source as the Group source, send
&S12,GRP,04,01,1<cr>.
If you send &S12,GRP,03,01<cr> and Zone 3 is not in
Group 1, YOU WILL get a &S12,ACK since the com-
mand structure is correct but no grouping will occur.
KEY
Description:
These are the same commands as the S12 IR com-
mands.
Command:
&S12,KEY,zz,abc<cr>
Query:
N/A
Reply:
N/A
Parameters:
<cr>:
carriage return: Hexadecimal 0x0D or Decimal 13
zz:
Zone: 01-32
abc:
000 = SYS OFF
001 = ZONE OFF
002 = ZONE ON
003 = ZONE TOG
010 = DND OFF
011 = DND ON
012 = DND TOG
013 = WHM OFF
014 = WHM ON
015 = WHM TOG
016 = MUTE OFF
017 = MUTE ON
018 = MUTE TOG
022 = DRC OFF
023 = DRC ON
024 = DRC TOG
025 = EQ FLAT
032 = TREB DOWN
033 = TREB UP
034 = BASS DOWN
035 = BASS UP
036 = VOLUME DOWN
037 = VOLUME UP
040 = GRP 1/5/9/13 OFF
041 = GRP 2/6/10/14 OFF
042 = GRP 3/7/11/15 OFF
043 = GRP 4/8/12/16 OFF
044 = GRP 1/5/9/13 ON
045 = GRP 2/6/10/14 ON
046 = GRP 3/7/11/15 ON
047 = GRP 4/8/12/16 ON
048 = SOURCE 1
049 = SOURCE 2
050 = SOURCE 3
051 = SOURCE 4
052 = SOURCE 5
053 = SOURCE 6
054 = SOURCE 7
055 = SOURCE 8
056 = SOURCE 9
057 = SOURCE 10
058 = SOURCE 11
059 = SOURCE 12
060 = SOURCE LOCAL
064 = VIDEO1 1
065 = VIDEO1 2
066 = VIDEO1 3
067 = VIDEO1 4
068 = VIDEO1 5
069 = VIDEO1 6
070 = VIDEO1 7
071 = VIDEO1 8
072 = VIDEO1 9
073 = VIDEO1 10
074 = VIDEO1 11
075 = VIDEO1 12

Elan System12 Specifications

General

Brand	Elan
Model	System12
Category	Controller
Language	English