Need help?Do you have a question about the Elspec G4500 BlackBox and is the answer not in the manual?
General| Measurement Type | Power Quality Analyzer |
|---|---|
| Category | Measuring Instruments |
| Voltage Channels | 4 |
| Current Channels | 4 |
| Compliance | IEC 61000-4-30 Class A |
| Accuracy | Voltage: ±0.1%, Current: ±0.1%, Power: ±0.2% |
| Communication Interface | Ethernet, USB |
| Display | LCD |
| Power Supply | 100-240VAC, 50/60Hz |
| Storage Temperature | -20°C to 70°C |
Provides an overview of the Portable BLACKBOX, its features, and benefits for power quality analysis.
Details the warranty terms and conditions for Elspec products and services.
Assists in choosing the optimal Portable PQ Analyzer based on specific needs and requirements.
Lists crucial warnings and precautions for safe operation and handling of the device.
Provides specific instructions to avoid electrical shock or fire hazards during device usage.
Lists the necessary tools and additional items required for the initial installation.
Details the package contents and how to unpack the Portable BLACKBOX and its accessories.
Explains how to power the unit using AC, auxiliary, or battery power supplies.
Guides on plugging and playing probes for accurate measurements, ensuring automatic recognition.
Details how to establish the initial connection via Ethernet or Wi-Fi for the first time.
Provides a quick and simple procedure for initial unit configuration via the Web Interface.
Explains how to configure voltage and frequency settings for accurate power quality analysis.
Details how to configure current probes, ratios, and nominal values for accurate measurements.
Guides on how to access and review the summary of all measurement readings.
Explains how to verify voltage and current readings against configured parameters.
Details how to verify that active power readings reflect positive values.
Instructions on how to enable PQZIP recording for continuous gap-less data capture.
Describes the default PQZIP recording settings when the unit is shipped from the factory.
Explains the First-In, First-Out concept for managing PQZIP files on local flash memory.
Details how to configure the fixed ratio for automatic tolerance adjustment of data storage.
Explains how to define the maximum time each PQZIP file will take to compress.
Enables or disables recording for Direct Current (DC) signals as needed.
Provides instructions on how to delete all PQZIP files from the device's internal memory.
Details how to monitor real-time grid parameters, readings, and graphs.
Explains how to view specific voltage and current measurement values and parameters.
Provides information on displaying and analyzing different electrical power parameters.
Explains how to monitor internal and external temperature readings for accuracy.
Describes the phasor window for vector representation of voltages and currents.
Details how to view actual voltage and current waveforms monitored by the device.
Provides analysis of short and long term voltage flickering according to EN50160 values.
Details how to view voltage and current harmonics spectrum and values.
Explains how to view active and reactive harmonic powers measured by the unit.
Describes how to view voltage and current sub and inter-harmonics.
Summarizes voltage and current harmonics in values, percentages, or angles.
Explains the compliance engine for real-time evaluation of power quality standards like EN50160.
Allows review of compliance standard and status evaluated by the internal compliance engine.
Provides detailed compliance information, including status, observation, and time parameters.
Displays graphical bars of compliance levels to ascertain compliance status against PQ Standards.
Guides on defining custom events based on measured parameters and logical conditions.
Details how to define conditions based on a single occurrence or parameter change.
Explains how to combine two sub-conditions to create complex event hierarchies.
Covers essential instrument settings for device setup, communication, and PQ parameters.
Explains how to view and configure additional functions for the device itself.
Explains how to configure time synchronization using SNTP, GPS, or the internal RTC.
Covers crucial network setup steps for establishing communication with the BLACKBOX.
Allows setting entry passwords for Web Interface and FTP Server access.
Guides on how to replace the internal lithium battery if performance decreases.
Explains how to reset the device to default factory settings.
Covers methods for upgrading the device firmware via FTP or local upload.
Details specifications for voltage and current inputs, including ranges and bandwidth.
Provides measurement ranges, resolutions, and accuracies for various parameters.
Lists general specifications including storage, synchronization, and communication details.
Provides physical dimensions, weight, environmental, and operating specifications.
Guides on connecting and configuring digital inputs for various functions like remote signals.
Explains how to set up relay outputs for automatic or manual switching based on conditions.
Provides a summary of all Portable BLACKBOX's Digital Input settings.
Details how to set up relay modes (Disabled, Manual, Auto) for conditional outputs.
Illustrates possible LAN connections for the Portable BLACKBOX, including G4500 and G3500.
Details configuration for serial ports (RS232, RS485/422) for data link connectivity.
Explains WAN port usage for connecting to external networks and internet accessibility.
Provides instructions for connecting to the G4500's internal Wi-Fi access point.
Describes the utility for searching and identifying BLACKBOX devices on the local LAN.
Guides on accessing the device via Web Interface or Elspec's Search Utility.
Explains how to use FTP for exchanging and manipulating PQZIP files and reports.
To Next Page
