About Monitoring Real Time Data
The Monitoring section displays real time readings and graphs of the grid’s parameters. The graph
display requires an ActiveX plug-in from Gigasoft that is downloadable either from Elspec's Website's
Support Section or alternatively can be installed directly from your BLACKBOX CD. The ActiveX plug-
in allows different view options needed for your PQ Monitoring. In the PQ Monitoring Section you will
be able to monitor the following PQ measurements of your Portable BLACKBOX:
Total measurements in the Summary Window
Voltage & Current Measurements
Average Measurements
Power Measurements
Internal & External Temperature Readings
Voltage & Current Phase Diagrams
Voltage & Current Waveforms
Short & Long Term Voltage Flickering
Flickering Waveforms
Minimum & Maximum Flickering Values
Voltage & Current Harmonics Spectrum
Active & Reactive Harmonic Powers
Voltage & Current Sub & Inter-Harmonics
Voltage & Current Harmonics in Values, %'s & Angles
Minimum, Maximum Values & Angles of Voltage & Current Harmonics
Minimum & Maximum Values of Active & Reactive Power Harmonics