Elspec G4500 BlackBox - Voltage Polarity

196
Voltage Polarity
Wiring errors usually result into an incorrect polarity. The Voltage Polarity settings allow you to
toggle the polarity without the necessity of rewiring.
 Either Reverse the polarity / maintain it at Normal from the drop-down selection:
 To apply your changes select to review your changes
NOTE NOTE NOTE
 If you are not logged on as the Administrator, you will not be able to change any of these
settings & you will receive the following error message in your attempt to do so:
 Once you have signed on as the Administrator, ensure that you select to
actually affect your changes.
SEE ALSO:
 About the Voltage & Frequency Window
 Power Configuration
 Potential Transformer
 Smooth Filtering
 Nominal