Elspec G4500 BlackBox - Average

80
table - DC VOLTAGE & CURRENT SECTION (rms, Min, Max) parameters
calculation method:
The table outlines the sections' Parameters including Calculation:
Parameter
Definition
DC Voltage & Current
RMS
RMS-DC is the Root Mean Square of the DC component of the signal
DC Voltage & Current
Min.
Minimum RMS value since the initial power up or the most recent selection
of:
DC Voltage & Current
Max.
Maximum RMS value since the initial power up or the most recent selection
of:
see also:
 About PQ Monitoring
 Averaging
 Power
 Temperature
 Phasors
 Waveforms
 Voltage Flickering
 Pinst Waveforms
 Min/Max Flickering
 Voltage & Current Harmonics
 PQ Harmonics
 Spectrum
 Harmonics Table
 V/I Min/Max Harmonics
 P/Q Min/Max Harmonics
Average