Elspec G4500 BlackBox - Relay Status

322
Relay Status
The Relay Status screen displays the setup status of the Relays. In order to access the page:-
 Open the screen by selecting Multi-IO Relay Status:
 The Relay Status Screen displays the setup status of the relays:
Definition of the Relay configuration:
Relay 1
Configured to Auto Mode, signaled on Events, using 0->1->0 as the Signal
Type for a Duration of 100ms. Relay signal is synchronized to Begin at the
time the Condition Ends.
SEE ALSO:
 About Monitoring And Setting Up your IO Ports
 Digital In Setup
 Digital In Status
 Relay Setup
 Event Signal
 Energy Signal
 Alarm Signal