Elspec G4500 BlackBox - Default PQZIP Settings

149
Default Settings
All Portable BLACKBOX Units leave the factory with PQZIP recording being Disabled (Off). The
instrument does not start recording until PQZIP is Enabled. When you will Access your unit for the
first time, the Summary in Elspec's Web Interface will display the default settings:
SEE ALSO:
 Principle of Operation
 PQZIP Recording
 Enabling / Disabling PQZIP
 FIFO
 Fixed Quality vs Fixed Ratio
 File Capacity
 FFT Mode
 Capture DC
 Erasing All PQZIP Data