Elspec G4500 BlackBox - Poe Output

181
PoE Output
Options & Indicators:
 State: Allows you to Enable/Disable the POE Out for LAN2 (See Also Establish
Communication)
 PSE Status: Indicates the status of the LAN2/LCD port (Ok/ Fail)
 PSE Error Code: Off signifies that this port is not in use. On signifies that an LCD screen is
currently attached to this port.
 To apply your changes select to review your changes
 To enforce your changes to your G4500/G3500 unit select
NOTE NOTE NOTE
 If you are not logged on as the Administrator, you will not be able to change any of these
settings & you will receive the following error message in your attempt to do so:
 Once you have signed on as the Administrator, ensure that you select to
actually affect your changes.
SEE ALSO:
 About Instrument Configurations
 Unit Configuration
 Product Info
 Alarms & Other Indications