EMC VNX VG2 User Manual

EMC VNX VG2/VG8 Gateway Configuration Setup Guide
212
NAS Install Options
EMC CONFIDENTIAL
21. To use the gateway auto-config script, select Yes (see Figure 125 on page 211) and
press Enter.
A confirmation prompt appears.
22. Tab to Ok and press Enter to confirm the gateway auto-config selection.
CAUTION
!
If prompted, do not press C to continue on the Control Station session yet.
The system prompts you to select an auto-config option (Figure 126).
Figure 126 Create system RAID group and LUNs settings
23. To automatically create the RAID group and LUNs, select the Create System
RAID Group and LUNs checkbox.
If you want to manually create the RAID group and control LUNs, clear the
Create System RAID Group and LUNs checkbox.
24. Tab to Ok and press Enter to confirm your selection.
The system prompts you to confirm the auto-config option (Figure 127).
Figure 127 Number of Fibre Channel switches screen
25. Tab to OK and press Enter to confirm your selection.

EMC VNX VG2 Specifications

General

Type	Gateway
Model	VNX VG2
Protocols Supported	NFS, CIFS
Form Factor	Rackmount
Connectivity	Ethernet